4 - For difficult stains such as soot or ink If such spots are on the surface, then you really an i

Many people detest sanding, degreasing, filling, stripping or whatever else may be involved in the preparation of a paint job. Require further Just as the removal of hardware from a table or unscrewing sockets. Sometimes they find it so bad that they would prefer a quarter busy to fool around, masking tape along the relevant outlet or deurklinkje then invest three minutes in unscrewing.
It is also understandable. You bought beautiful soup chafing dish paint. You see your locker or table certainly pimped in full glory on your retina. What will it be like !!! The temptation is very great to just immediately (or as soon as possible) going to go. But (thankfully) still plays often the conscience. We hear that persistent little soup chafing dish voice in our head; Should not I do something bad before I can go do something fun Should I not clean anything. soup chafing dish Unscrew something? Something filling? Do something nasty that I tired of being?
I also get a lot of questions soup chafing dish about the preparation, along the lines of: Do I really have all the paint off barns? Is it really necessary to degrease? soup chafing dish I just can not go over that wax? The one time I can tell you that it is not necessary that not everything has gone, that it is sufficient soup chafing dish to simply degrease. And if you just paint a little thing, for decoration, not for eternity, but for fun, I would certainly not make me too busy. But sometimes, especially if you're going to take a nice piece of furniture construction just have indeed. Unfortunately. Is no different.
1 - If there is an old wax sit on your furniture if you want to be painted is all was off. (If you're going to put a new layer of wax, you may slightly less strict with yourself and just gives you the most away.)
The obvious question is of course: "How can I see if there was sitting on a piece of furniture?" Usually this is pretty easy to find; scratch but agree with your fingernail across the surface. If accumulates a greasy layer under your nails, there almost certainly was. You notice the way too quickly when you start sanding. The friction wax will be soft and there will be a caked layer of wax on your sandpaper shapes. Also proof that you're dealing with an old wax.
The next question is usually "How do I get that wax in an easy way out?" soup chafing dish My answer is adamant lovely people; remove old wax is just hard work. You need to work with steel wool and wax remover. And you will begin to feel your arm muscles! Nice workout! The Wax we sell is low odor, low solvent and friendly to your furniture. But if you are not afraid of a horse means you can get started with a chemical stripper, although this may be a rotklusje because ultimately that drab there anyway.
2 - With a glossy lacquer or paint a glossy layer means; smooth and dense in texture, so a tough adhesion for the new paint. Paint would like to have a bit of grip. This can be so easily solved by sanding with a medium to fine sandpaper until it looks dull. Those shiny low light But one consolation: more effort is not needed, just dull enough. It is even unwise to old paint by sanding, as paint formerly soup chafing dish often contained lead. Unnecessarily Through scouring this leaded dust then spreads through the room again. Therefore it is smart to put a substance. Mask with that kind of chores The coating on oak furniture you better leave intact as oak tannic acid and can cause discoloration in the new paint (so-called. Bleeding wood).
3 - If the old paint flakes or peels If the old paint off or peeling, and you do nothing, look at the new paint will flake fun with it and let go. Waste of work involved. So Remove loose paint by sanding. Failing that you should come up with stronger measures; bite or burn. Sit here and there wear spots but you doubt whether it is necessary to remove all the paint Then do the tape test: slice here and there a piece of tape and cover with a yank. If paint comes along, the surface is not stable enough. All sanding so. This also applies to a powdery surface anyway.
4 - For difficult stains such as soot or ink If such spots are on the surface, then you really an insulating primer (isolate foreground) application first. Ink and soot and other stubborn stains will even keep coming. Tens of layers of paint over Fighters fight and so do not do it, but rather that first preparation. It will be a lot of work and aggravation you save later.
5 - Bleeding timber Some types of wood contain coloring agents (such as tannins, tannic acid) which are soluble in water. This is a he